塑胶模具清洗机用途、原理、优点
爱德乐电解清洗设备用途：1、用于精密塑胶模具，模块，模件，模仁，镶针，镶件，去高温积碳，去硫化物，瓦斯气体，油污，锈斑的清洗。
Equipment application: applied to precision plastic mould, module,insert, Pin,clean high temperature carbonium, clean sulfide, gas, oil dirt and rust spots cleaning
2、爱德乐电解超声波模具清洗机原理：Electroanalysis ultrasonic mould cleaner principle
电解超声波是由电解超声波清洗槽,喷淋清洗槽，超声波系统,电解电路系统,电极,托盘,过滤循环系统,定时装置,面板电器开关装置组成。
Electroanalysis ultrasonic includes electroanalysis ultrasonic wash tank, spray wash tank, ultrasonic system, electroanalysis circuit system, electrode, tray, filtration cycling system, timing setting and panel switch.
3、爱德乐电解清洗：是利用电解作用将金属表面的污垢去除的清洗方法;电解是在电流作用下,物质发生化学分解的过程.在电解过程中,金属表面的污垢开始脱落,在超声波的冲击下加速了剥离，在金属表面沾有动植物油,矿物油,锈迹，锈斑,积炭,氧化层.用电解的方法把这些污垢去除叫电解脱脂。Electroanalysis cleaning is a method by electroanalysis function to remove the dirt from metal surface; electroanalysis is a process which the matter with chemical decomposition. The dirt of the metal surface fall off during the electroanalysis, and accelerate the peel off speed with the concussion from ultrasonic. The electrolytic method is used to remove the propagation oil, mineral oil, rust spots, oxide layer from metal surface which is called electroanalysis degrease.
3、爱德乐电解洗模机：当电流通过含有特殊配方的电解质的水溶液时,在电解槽的正极附近产生氧气,负极产生氢气.把要清洗的金属部件放入电解槽的正极（清洗篮）,在电解过程中,在金属表面会有细小的氢气产生,这些小气泡促使污垢从金属表面剥离。
The anode of the electrobath will produce Oxygen and cathode will produce the hydrogen when there is current pass water solution with special electrolytical mixture. Put the metal parts into the anode of the electrobath(clean basket), there will produce small hydrogen on the metal surface, and these small air bubbles will prompt the dirt peel off from metal surface.
4、 爱德乐超声波清洗：是利用28KHZ的高频电源,使换能器由电能转换机械能的过程,在这过程中换能器向清洗槽溶液传递巨大的能量,在液体中产生正压和负压区,形成数以万计的空穴气泡,在不断的形成爆炸,冲击被清洗金属物表面,使金属表面的污垢快速脱离。
The ultrasonic cleaning use the 28KHZ high frequency power supply and the transducer by converting electric energy to mechanical energy. In the transducer to the cleaning solution tank transfer huge energy, produce positive pressure and negative pressure zone in the liquid, tens of thousands of cavitation bubbles formation, in continuous form into the explosion, the impact is cleaning the metal surface and quickly out of the dirt on the surface of the metal.
5、爱德乐电解清洗机：循环系统是由耐腐蚀的广州小巨人磁力泵,过滤器组成自循环，让清洗脱落的污垢迅速被过滤棉芯隔离，减少液面漂浮物.同时可加速溶液的电解。净化溶液,提高溶液的利用率。
The circulation system is composed of corrosion-resistant guangzhou small giant magnetic pump and filter, which is self-circulating, so that the dirt removed from the cleaning can be isolated by the filter cotton core quickly, reducing the floating matter on the liquid surface, and accelerating the electrolysis of the solution at the same time. Purify the solution, improve the utilization rate of the solution.
6、爱德乐超声波用途：广泛用于各种行业。化工行业有电解清洗，氧化处理表面清洗，电镀前处理清洗。
制造行业有、汽车行业，电子行业，LED行业，家电行业，智能家居行业，模具清洗行业。污水处理行业，医疗行业，环保环境行业，光学透镜光电行业。
7、爱德乐模具行业的应用：用于清洗模具表面的瓦斯气体清洗，润滑油清洗，防锈油清洗，锈迹锈斑清洗，粘胶料清洗，不明污垢清洗，灰层清洗，对模具的光面，晒纹没有造成损伤。
8、爱德乐模具清洗机主要清洗对象：模具表面清洗，模具水路清洗，模具模板清洗，模仁清洗，模芯清洗，模块清洗洗，顶针清洗，芯子，镶件，镶针，滑块清洗。
9、爱德乐模具清洗机范围：连接器模具，LED模具，化妆品模具，火牛模具，手机模具，家电模具，医疗模具，光学透镜模具，汽车模具。
10、爱德乐模具清洗机工艺：电解超声波清洗 →喷淋清洗→防锈浸泡→压缩空气吹干。
11、为什要使用爱德乐模具清洗机？
答：因为爱德乐模具清洗机10年品牌，10专注模具清洗机的设计制造，成熟的清洗工艺，有成熟的配套清洗剂，有专业的售后维修人员。
11、爱德乐模具清洗机有哪些优点？
答：操作简单易学，采用进口元器件，机器稳定不易坏，快速清除模具上污垢。
12、爱德乐电解模具清洗机能帮企业解决哪一些问题？
答：机器可以带替2-3个员工清洗模具，节省人工成本，解决员工洗模不规范问题，解决人工清洗不彻底，不到位问题，解决超声波清洗不干净的问题。